|
|
|
|
CHIMNEY
AUTOMATION SYSTEM (CASV)
Ensure boilers operate at maximum efficiency by providing
constant draft at all firing rates. System senses draft and
modulates fan speed as stack conditions or firing rate change
to maintain desired draft setting. System solves difficult
venting arrangements, allows different category appliances
to be connected to a common stack and often reduces vent size
and stack height. Vent sizing is determined and guaranteed
by the manufacturer.
Features: Maintains perfect draft under all conditions.
Eliminates common code violations. Reduced stack costs by
allowing for a smaller stack size. Improve boiler efficiency
and operation.
Request
Information Back to top
|
|
|
|
CHIMNEY FAN
Mechanical draft fan for installation at the chimney termination
point, vertically or for side-wall venting. Assures a negative
pressure in the entire chimney or stack system. Discharges
horizontally (vertically, if side-wall vented) at a high velocity.
Cast aluminum design.
Futures: Variable speed, smaller stack sizes, solves
code issues, high efficiency
Request
Information Back to top
|
|
|
|
MODULATING COMBUSTION AIR SYSTEM (MCAS)
Provides make-up combustion air to boiler room exactly
matching burner requirements. System senses room air pressure
and modulates variable speed fan to match combustion air
to burner firing rate by maintaining a constant room pressure.
Replaces large combustion air louvers that often introduce
excess cold air into the boiler room.
Features: Lower installation costs, smaller wall
penetration, matches exact combustion air requirement.
Request
Information Back to
top
|
|
|
|
KITCHEN VENTILATION SYSTEM
Products that include: Grease fans for kitchen hoods;
Grease fans for wood-fired pizza ovens & BBQ's; Chimney
Fans for fireplaces
Fans are designed and manufactured to be the best kitchen
exhaust fans available and to meet future requirements for
energy efficiency. Direct Drive and Variable Speed are standard.
All fans are ruggedly built with only the highest quality
components and have an unmatched history for reliability and
durability.
For the kitchen ventilation market we offer a comprehensive
line of ventilation
Request
Information Back to top
|
|
|
|
MECHANICAL
DRYER VENTING SYSTEM (MDVS)
Use with multiple commercial laundry dryers. The purpose
of the system is to solve common dryer venting problems (excessive
drying time) and allow for alternative designs of the venting
systems. The mechanical dryer venting system maintains a perfect,
constant operating pressure for the dryers by modulating the
fan capacity.
Features: Constant draft for improved energy efficiency
and safety. Faster drying. Smaller ducts
Request
Information Back to top
|
|
|
|
INLINE BOX VENTILATOR
Inline Ventilator is intended for use as an exhaust or supply
fan. It can be installed in-line or at a termination point
in a stack or duct system. Typical uses are: boiler exhaust,
residential kitchen exhaust, general exhaust applications
and combustion air supply.
Features: Low energy consumption, Variable speed, Compact
Design
Request
Information Back to top
|
|
|
|
|
|
STACK
AND BREECHING DESIGN ASSISTANCE:
Contact your local Heat & Power Products office for assistance
with stack sizing, layout, specifications and code issues.
Job specific CAD drawing available. Request a "Stack
Sizing" handbook.
Features: engineered venting systems are covered by
the Selkirk-Metalbestos "Extended 10-year Warranty".
Request
Information Back to top
|
|
|
|
BOILER STACKS, POSITIVE PRESSURE
5" - 48" I.D. Modular prefabricated U.L Listed
Boiler Venting Systems. 1000º F continuous and 1400º
F intermittent temperature rating.
Features: Complete line of fittings. Double-wall.
Stainless steel. Fiber insulation. Category I & III
venting. Models PS & IPS Options for: Fiber insulation
and stainless steel outer jackets. Free standing systems
available.
|
|
|
|
BOILER STACK, TYPE B - NEUTRAL OR NEGATIVE DRAFT
A complete line of Type "B" venting solutions.
Features: UL Listing, Category I venting, Models
DF, QC, SSII, RV, DS, SG. Stainless steel options.
|
| |
|
|
SPECIAL
GAS VENT
Gas vent system with built-in gaskets designed for use with
Category II, III, IV gas fired appliances. Model CV AL29-4C
® a single wall special gas vent.
Features: easy installation, UL Listing.
Request
Information Back to top
|
|
|
Click
for Enlarged View
|
GREASE
DUCT
Use with cooking appliances, ventilation hoods, restaurant
grease ducts, and pizza oven exhausts. 5" - 48"
I.D. Modular prefabricated systems.
Features: 500º F continuous and 2000º F intermittent
temperature rating. UL listed. Reduced clearance to combustible
surfaces. Options for: Fiber insulation and stainless steel
outer jackets.
Request
Information Back to top
|
| |
|
Click
for Enlarged View
|
ENGINE
EXHAUST
Use with Industrial furnaces, processing equipment, kilns/ovens,
diesel/turbine exhausts. 5" - 48" I.D. Modular prefabricated
systems.
Features: 1400º F continuous and 1800º F
intermittent temperature rating. UL listed. Reduced clearance
to combustible surfaces. Options for: Fiber insulation and
stainless steel outer jackets.
|
|
|
|
|
|
Heat-Fab's
Special Gas Vent, is an AL 29-4C® stainless-steel inner
wall venting system designed for use with any Listed Category
I, II, III, or IV gas-fired appliance. Ideal for venting mid-
and high-efficiency natural gas and propane fired equipment
with condensing flue gases and for systems with positive-pressure
venting requirements including sealed combustion applications.
Features: Single or Double-wall Construction, AL 29-4C
Flue-Gas Conduit Ring-and-Tab External Closure System, 100%
Welded Seams and Consistent Sizing, Smooth Wall Design, Full
Range of Sizes 3"-32, UL Listed .
Request
Information Back to top
|
|
|
|
 Industrial
Combustion, a division of Aqua-Chem, Inc. is a leading manufacturer
of burners designed for commercial, industrial, and institutional
applications. Our burners are developed to deliver an impressive
return on investment, and feature the following characteristics:
- Maximum efficiency.
- True forced draft design controls the air and fuel mixture,
resulting in complete combustion.
- Low maintenance.
- Modern, reliable controls maintain adjustment for dependable
performance.
- Cost savings.
- Retrofitting your mature boiler with one of our burners
can save up to 30% on your fuel costs.
Request
Information Back to top
|
|
|
|
M-SERIES Forced Draft Dual Fuel Burners
The M-Series Burners include gas, oil, and gas/oil combinations
from 1,400,000 Btu/h to 10,500,000 Btu/h. These U/L and cU/L
listed units are designed for a wide range of applications
including boilers, heaters, furnaces, kilns, and dryers.
Request
Information Back to top
|
|
|
|
K-SERIES Forced Draft Dual Fuel Burners
The K-Series Burners are designed to operate on gas, oil,
or a combination of fuels at capacities ranging from 1,260,000
to 14,500,000 Btu/H. The K-Series Burners are specially designed
for Scotch Marine-type firetube boilers. The design of these
units feature low CO performance, a unique air damper for
easy combustion set-up independent low and high fire adjustment.
Request
Information Back to top
|
|
|
|
D-SERIES Hev-E-Duty Forced Draft Dual
Fuel Burners
The D-Series gas, oil, and combination gas/oil burners are
a forced draft packaged burner system. Known for its trouble-free
operation and efficient performance, the D-Series Burners
are ideal for a wide range of applications. U/L and cU/L listed
Request
Information Back to top
|
|
|
|
LN-SERIES Low Nox Flue Gas Recirculation
Burner System
The L/N Series burners are designed to meet the ever more
stringent State of California emission standards. Industrial
Combustion was the first to meet these strict standards. We
at Industrial Combustion will continue to develop lower emission
units in advance of the lower emission standards that are
set for the future.
Request
Information Back to top
|
|
|
|
SERIES 1
The Series 1 burners are designed for large boilers applications.
A forced draft design is able to handle the high furnace pressures,
multi-fuels, and is also available as a low NOx <30 ppm
with F.G.R.
Request
Information Back to top
|
|
|
|
|
In
the course of their day-to-day operations, many facilities
create waste that requires special handling and disposal.
These facilities include veterinary clinics, animal control
facilities and pet cemeteries.
Shenandoah manufactures crematory systems to dispose of these
wastes in a cost effective, environmentally safe way. Our
state-of-the-art emissions laboratory carefully monitors the
results of our on-going testing program to ensure full compliance
with state and federal environmental regulations.
Request
Information Back to top
|
|
|
| Support
after the initial sale is critical to the everyday operation
of your facility… we understand this! HEAT & POWER
PRODUCTS, INC. differentiates itsself from our competitors
by offering Full Start-Up Service, Operator Training
and Warranty Service on all our represented product lines.
Our experienced staff will ensure your boiler is commissioned
per the manufacture's specifications. We also provide training
and technical support to ensure proper installation and operation.
 On-going
Product Support, Training and Service after the sale.
We offer on-going service and support on of all equipment
we represent.
On-demand Parts.
We know that you need parts for your boilers and we keep
them on hand and ready to get to you when you need them -
often on the same day!
We stock consumable items for Fulton & Patterson-Kelley
Boilers.
Our Cleaver-Brooks partner, PBBS Equipment, stocks Cleaver-Brooks
parts in four warehouses across Wisconsin.
Other parts can generally be delivered to you in one day,
drop shipped directly from our manufacturers.
For your convenience we accept VISA, MasterCard or your Purchase
Order for parts orders.
Request
Information Back to top
|
|
BOILER CONTROLS
|
|
|
H&PP uses many of the multiple boiler
control products offered by TEKMAR.
We specialize in multiple boiler control systems providing
lead-lag, staging, outdoor reset, pump control, damper control
and custom panels designed and built by Heat & Power Products,
Inc.
Request
Information Back to top
|
|
|
|
HEAT-TIMER
CORPORATION offers a complete line of controls for
the HVAC/R and Plumbing Industry. Over 60 years of experience
insures that Heat-Timer specifically designs, tests and builds
energy efficient control systems which are easy to install
and use, and which provide maximum comfort.
Request
Information Back to top
|
|
|
|
CENTURY
CONTROLS products represent hi-tech, energy saving
and pollution reducing controls, which solve many of the problems
facing today's rapidly changing industries. Century Controls,
Inc. has an impressive customer list representing most of
the industrial sector and covering many of the public sector
institutions such as hospitals, schools, and prisons.
Century offers a sophisticated Multiple Boiler
Management System, a "premier" O2 Control System,
a unique Hot Water Boiler Management System, a Process Control
that provides "gentle" control of steam valves and
other final elements, and a Draft Damper Control all with
a patented control algorithm.
|
|
|
|
|
Wide Range of Pumps for Commercial and Industrial
Applications. Plumbing & HVAC Products. A Complete Line
of Pumps for Residential and Light Commercial Use
Request
Information Back to top
|
