Heat & Power Products, Inc.

Fulton

• VANTAGE
• Sizes: to 6,000,000 BTU/hr
• The Fulton Vantage hydronic condensing boilers have been engineered to provide the highest thermal efficiencies possible. The large heating surface area and burner turndown capabilities provide high performance in a condensing boiler design
• The Vantage boiler is the first condensing boiler to offer operation on #2 oil as a backup fuel, with efficiencies up to 93%. This option provides the ability to take advantage of existing fuels in retrofit applications. When #2 oil is selected, the Vantage control system automatically loads the correct fuel profile, simplifying backup fuel switchover requirements. The same simplicity exists for natural gas / propane dual fuel applications.
• Request Information   |  Back to top

• FULTON PULSE & PULSE QT
• Sizes: 300 -2,000 MBH. 60, 100 and 160 PSI
• Features: sidewall vented, efficiencies up to 98%, full Modulation with 5:1 turndown, may be skid mounted and prepiped to create a complete system. No minimum flow rates or return water temperature requirements.
• Request Information   |  Back to top

• RELIANCE
• Sizes: 500 to 3,000 MBH
• Features:High Efficiency, Non-Condensing, 5:1 Full Modulation, Copper Fin Boiler with Color Touch Screen Display, low emissions with <14ppm NOx and a ventless gas train. The Reliance was designed with ease of installation, service and maintenance in mind.
• Request Information   |  Back to top

• ICW or VMP Series
• Sizes: 4-150 HP (175-5978 MBH). 60 or 160 PSI
• Features: Fuel Flexibility, Vertical Tubeless Design, Top Fired, Factory piped and wired Skidded Systems.
• Request Information   |  Back to top

• FULTON BOILER WORKS MODEL RB
• Design: 3 pass Wet Back Horizontal Firetube
• Sizes: 30-800 Horsepower, steam or hot water, up to 300 PSIG
• Features: Heavy Duty Construction, small foot print, high efficiencies, standard gas & oil burners with low NOx options.
• Request Information   |  Back to top

• FULTON BOILER WORKS MODEL FBS
• Design: 3 pass Wet Back Horizontal Firetube with corrugated furnace
• Sizes: 30-800 Horsepower, steam or hot water, up to 300 psig
• Features: Heavy Duty Construction, high efficiencies, standard gas & oil burners with low NOx options.
• Request Information   |  Back to top

• ELECTRIC
• Sizes: 1,000 MBH
• Features: Efficiencies to 99%, Precise Temperature Control, Fully Condensing, ASME Section VIII. onstructed from stainless steel alloy Duplex 2205 to resist chloride stress. Small footprint to fit through standard doors.
• Request Information   |  Back to top

• PULSE DOMESTIC WATER MODEL DWH
• Sizes: 1.2 to 700 Kw (1.2 to 70 HP)
• Features: Electric Clean firing, No Stack, Compact size.
• Request Information   |  Back to top

LES

• L.E.S. BOILER COMPANYMODEL VW
• Design: Vertical Firetube, Hot Water
• Sizes: 200MBH to 3300MBH Input
• Features: Gas/Oil burner, optional copper-tube heat exchangers
• Request Information   |  Back to top

Patterson Kelley

• MACH
• Sizes: 300 – 4,000 MBH
• Features: Achieve up to 99% Efficiency. 5:1 Turndown Burners. Sealed Combustion, Low Mass Design, Small Foot Print, Natural Gas and LP fired. Whisper Quiet
• Request Information   |  Back to top

• MODU-FIRE FORCED DRAFT
• Sizes: 750-3000 MBH
• Features: 5:1 Turndown Burners. Sealed Combustion, Low Mass Design, Small Foot Print, Natural Gas and LP fired. Modular.
• Request Information   |  Back to top

• PK HYBRID HEATING PLANT
• Sizes: 1,000 to 20,000 MBH
• Features: Combines non-condensing and condensing boilers into innovative boiler room solution by dividing the load between the boilers assigning the right boiler based on current load conditions and water temperature requirements. We call this a hybrid system, and it offers 100 percent of the efficiency benefits while reducing the first-costs.
• Request Information   |  Back to top

• PK MACH CONDENSING INDIRECT DHW SYSTEMS
• Sizes: 300 – 4,000 MBH condensing domestic hot water
• Features: A practical and affordable high efficiency water heating system. Instead of heating water directly in the condensing appliance, an inexpensive readily replaceable heat exchanger is installed between the condensing appliance and the tank, so the inexpensive heat exchanger takes the scaling hit, prolonging the life expectancy of the water heater. In addition, the PK MACH heat exchanger is designed so that the appliance can operate below condensing temperatures.
• Request Information   |  Back to top

• PK MACH CONDENSING INDIRECT DHW SYSTEMS
• Sizes: 700-4,000 MBH. 160 PSI
• Features: Low-High-Low Burners, Sealed Combustion, Low Mass design, Small Foot Print, Non-condensing design, Category I Venting Label. Natural Gas and LP fired. Modular.
• Request Information   |  Back to top

• PK MACH CONDENSING INDIRECT DHW SYSTEMS
• Sizes: 700-4,000 MBH. 160 PSI
• Features: LP & Natural Gas Dual fuel Burners are standard. Quick change over between fuels. Qualify for Interruptible Fuel rates. Same features as Thermific. Modular
• Request Information   |  Back to top

• DOMESTIC WATER
• Sizes: 700-4,000 MBH, 160 PSI
• Features: The above models are available for direct or indirect domestic water heating application. Glass lined heads. Skid Packages.
• Request Information   |  Back to top

Ludell

• DIRECT CONTACT WATER HEATERS
• Sizes: 950 - 25,000 MBH. Water heating rate to 500 gallons per minute
• Features: Direct Contact Water Heaters 99.8% Combustion efficiency this means a 30-40% fuel savings compared to a boiler, Guaranteed performance, all stainless steel, U.L. Listed.
• Request Information   |  Back to top

Armstrong

• Armstrong - a family tradition of fluid flow innovation, superb workmanship, and acknowledged product reliability. Since their founding in 1934, Armstrong has pioneered an uncompromising range of products for customers in residential, commercial and industrial markets. From the very beginning, the Armstrong name has been a benchmark for quality in design, engineering and manufacturing of Fluid Flow Devises.

• Request Information   |  Back to top